MA BM 6000 E-LINE SuperBaiter
Deep Sea Hydraulic Systems
Key Features
- Weight: 380 kg / 838 lbs
- Power Supply: Servo Electric
- Setting Speed: Up to 6 hooks/sec.
Key Information
- Baits up to 6 hooks per second
- High baiting precision
- Low maintenance cost
- Simple adjustment to desired bait size
- Easy troubleshooting
- Compatible for circle, EZ baiter and offset hooks
- Patented RotoBait™ system
Product Information
The MA BM 6000 SuperBaiter is designed as a part of the Mustad Autoline DeepSea System. Performance without compromise, – each detail is designed to make the baiting process even more accurate at high speed, – and still simple to operate.
Precision baiting
At up to six hooks per second the MA BM 6000 SuperBaiter automatically cuts the bait at a pre-set size and baits the hooks consistently at a speed of up to 360 hooks per minute.
When the first buoys and anchors are launched, the hooks and line are pulled from the storage magazines through the baiting machine and over the stern. Setting speed can vary between 6 to 10 knots (3-6 hooks per second depending on the spacing between the hooks).The bait is placed on a spiked conveyor chain that feeds it into the machine where the hooks trigger a knife to cut the bait. With the patented RotoBaiter function the bait is double crouched and secures accurate baiting of hooks passing through the SuperBaiter. The SuperBaiter is operated by one crewmember who feeds the bait onto the conveyor chain.
- Setting speed, 6 – 10 knots in high seas
- Compatible for Circle, EZ baiter and Offset hooks
- Error search via satellite
- Upgrade with LineSetter
Service controller Sinamics System
- Touch panel with easy operation, error codes shows in the display
- “Heavy Duty” function on the touch panel for additional knife force increase in periods
- Possibility to pre-program baiting of every seccond hook and up to every tenth hook if desired
The baiting machine can be supplied with Mustad LineSetter and LineController
Upgrade of old SuperBaiter is possible. Please contact us for further informatin.
MA BM 3000 Hydraulic AutoBaiter
Deep Sea Hydraulic Systems
Key Features
- Cuts bait to a pre-set, consistent size
- Automatically double crouches bait onto the hook
- Capable of baiting 3 hooks per second
- Compatible with manual and hydraulic MagPacker, Cross Ship Rails, and HandyMag storage system
- Compact design, requiring minimal space for installation and operation
Product details
- Weight: 140kg (311lbs)
- Length: 1370mm
- Width: 770 + 530 mm
- Height: Adjustable 1600 - 1800mm
- Oil Flow Rate: 16/28 l/min
- Power Supply: Hydraulic
Product Information
The Mustad Autoline autobaiters automatically cuts the bait at a preset size and baits the hooks with precision.
Precision Baiting
The MA BM 3000 AutoBaiter baits hooks with precision at a speed of up to 180-200 hooks per minute (three hooks per second), cutting bait to a pre-set size.
Baitfish is placed on a spiked conveyor chain that feeds it into the machine. As the hook is pulled through, the knife is triggered, cutting the bait to a pre-set size (26mm-32mm). The hook then penetrates the bait twice before being shot over the stern.
Compact and flexible
The MA BM 3000 AutoBaiter is designed as a part of Mustad Autoline Coastal System and works perfectly with both the manual MagPacker and HandyMag storage magazines. It requires little space thanks to its compact design, and includes an integrated waste collector. The machine can operate with EZ/J-hooks ranging from size 11/0 to 15/0, and circle hooks from size 12/0 to 14/0 both straight and offset.
Shooting the line
When initial buoys and anchors are deployed overboard, lines are naturally pulled from the storage magazines through the baiting machine before being set. The baiting speed is approximately three to four hooks per second, depending on the spacing between the hooks and the speed of the boat. The baiting machine is operated by one crewmember who feeds bait fish onto the spiked conveyor belt.
MA HS 2000-03 Hydraulic HookSeparator
Deep Sea Hydraulic Systems
Key Features
- Weight: 300 kg / 660 lbs
- Height: 1910 mm
- Hauling Power: Adjustable
- Hauling Speed: 0-100 m / min
- Sheave Diameter: Outer diam. 440mm
- Oil Flow Rate: 16 l/min / 4,2 gl/min
- Power Supply: Hydraulic
New version - increased capacity
Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allowes the hooks to slide smoother and farther in the direction of the storage magazine which has been prooven to be less labor intensive.
Product Information
The latest version of HookSeparators
- Efficient separation of hooks and line
- Increased number of hooks hauled
- Less labour intensive operations
- Increased profit
High speed re-racking of hooks and line
The main function of the HookSeparator SP2000 is to separate the hoooks from the mainline and guide them onto the storage magazines. This is done automatically as the line is hauled onboard. The HookSeparator is also a slack taker keeping tension on the line coming from the main hauler.
New version – increased capacity
Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allows the hooks to slide smoother and farther in the direction of the storage magazine which has proven to be less labor intensive.
Magnet pattern
The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline on to the magazine.
High quality components
The HookSeparator is made of stainless steel. The sheaves are made out of durable and lightweight aluminum composite material. The pressure wheel is spring loaded, making sure the sheaves get maximum grip on the line. A special hook guide design reduces wear on hooks and gear and ensures efficient re-racking result.
Optional water jet
To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water pump. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.
MA HS 2000-02 Hydraulic HookSeparator
Deep Sea Hydraulic Systems
Key Features
- Weight: 300 kg / 660 lbs
- Height: 1760 mm
- Hauling Power: Adjustable
- Hauling Speed: 0-100 m / min
- Sheave Diameter: Outer diam. 440mm
- Oil Flow Rate: 16 l/min / 4,2 gl/min
- Power Supply: Hydraulic
New version - increased capacity
Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allowes the hooks to slide smoother and farther in the direction of the storage magazine which has been prooven to be less labor intensive.
Product Information
Efficient re-racking of hooks and line
The main function of the Mustad Autoline HookSeparator is to separate the hooks from the mainline and guide them onto the storage magazines. This is done automatically and consistently as the gear is hauled onboard. The hook separator is also a slack taker keeping tension on the line coming from the main hauler.
Specially designed magnet pattern
The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline onto the magazine.
Optional water jet
To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water jet. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.
MA MPH Hydraulic MagPacker
Deep Sea Hydraulic Systems
Key Features
- Space efficient
- Increased safety
- Time saving, - less tangling during setting
- Durable solution - made of heavy-duty stainless steel
- Power Supply: Hydraulic
Key Information
- Baits up to 6 hooks per second
- High baiting precision
- Low maintenance cost
- Simple adjustment to desired bait size
- Easy troubleshooting
- Compatible for circle, EZ baiter and offset hooks
- Patented RotoBait™ system
Product Information
The hydraulic operated MagPacker system for automatic handling and storage of hooks and line is designed to reduce manual labour and increase safety and efficiency onboard.
To ensure compact storage of lines a LinePress system is standard equipment on a MA MPH MagPacker storage system.
Key features
- Space efficient storage of magazines with hooks and line
- less tangling during setting, – the line coils don’t catch on other coils and turn around when moving the line towards the baiting machine
- Less manual handling of the gear during setting and hauling
- Increased safety on board
- Made of heavy-duty stainless steel
- Increased profit
Number of hooks per meter
Please note that quantity of hooks stated in quotes is an estimate. Quantity per meter will always depend on thickness, age and quality of the hooks and line. Consequently these given numbers are to be taken as a guideline only and not as factual numbers.
Weight example (approx.) without valves
1950 kg / 4300 lbs – incl. 20 empty magazines/ 3 m
2050 kg / 4519 lbs – incl. 20 empty magazines/ 3,5 m
2150 kg / 4740 lbs – incl. 20 empty magazines/ 4 m
Lenght of magazines 3 – 3,5 – 4 m
MA LP V2 – LinePress
The hydraulic MagPacker system is delivered with a line press as standard equipment. The line press keeps the rest of the line in place when setting and hauling to give room for the hooks and line sliding on the front magazine. Also, the line press act as a safety feature to prevent great movements of the heavy line during bad weather.
MA CR CrossShip rails with magazine trolleys
Deep Sea Hydraulic Systems
Key Features
- Weight: 140kg (311lbs)
- Length: 1370mm
- Width: 770 + 530 mm
- Height: Adjustable 1600 - 1800mm
- Oil Flow Rate: 16/28 l/min
- Power Supply: Hydraulic
Key Information
- Cuts the bait at a pre-set size
- Automatically double crouches the bait on the hook
- 3-4 hooks per second
Product Information
Compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel.
Robust cross ship rails with magazine trolleys designed for manual handling and storage of magazines with hooks and line. the magazines are mounted to trolleys in transverse tracks and are pushed manualy to setting or hauling position.
Delivered with 110 < = 7mm ,125 < = 9 mm ,160 < = 11mm distance between the magazines.
MA HH 3200 Hydraulic SuperHauler
Deep Sea Hydraulic Systems
Key Features
- Weight: 1099 kg / 2423 lbs
- Length: 1883 mm (with HookCleaner)
- Width: 1434/1233 mm (+/- LineRetriver)
- Height: 2327 - 1827 mm (adjustable long/short)
- Hauling Power: 1700 kg / 3750 lbs
- Hauling Speed: 150 m/min / 500 ft/min
- Sheave Diameter: 600 mm
- Oil Flow Rate: 100 l/min / 26,4 gal/min
- Power Supply: Hydraulic
Product Information
A compact and silent high-pressure hydraulic line hauler, horizontally mounted for better visibility and optimal pull force
- Heavy-duty stainless steel
- 3,2-ton pull on the capstan (7000lbs)
- Hydraulic Motor: Radial Piston stainless steel axle
- Easy to operate, low maintenance
- Standardised for 7 – 12mm line. Other diameters are optional.
Since approximately 80% of the time is used for hauling on board an Autoline vessel, efficient equipment is key to increased profits.
Large sheaves reduce wear and tear on the line while also significantly improving grip of the line. The hauler is directly powered by a radial piston motor with a stainless steel shaft.
The recommended solution is a complete hauling station with SuperHauler™ MA HH 3200, MA RC RotoCleaner,
The hauling unit can also be supplied as a stand-alone unit, and controlled manually by a valve at the rail.
MA LR 320 LineRetriver
Deep Sea Hydraulic Systems
Key Features
- Weight: 160 kg
- Oil Flow Rate: 2 l/min (0.5 gl/min)
- Power Supply: Hydraulic 12,5 ccm 2 pcs
Key Information
- Easy to change brushes
- Extended service life
- Independent motor on each brush
Product Information
The function of a LineRetriver:
- Keep constant tension on the line
- Synchronized with the hauling unit
- Leads the line swiftly off hauler and into tubes towards the HookSeparator
- Light weight composite material sheeves
- Easy to operate and maintain
Synchronized with the hauling unit
The hauling power on the LineRetriver™ will automatically be reduced if the main hauler stops, to avoid the line to loose the grip on the sheaves and start to skid.
Sheaves on the LineRetriver
- Patented spring loaded clamp system to increases the pressure on the line
- The hauling diameter for the line is Ø230mm.
- The external diameter: Ø320mm.
- Wearing parts are made of hardened stainless steel
MA HC 200 RotoCleaner
Deep Sea Hydraulic Systems
Key Features
- Weight: 160 kg
- Oil Flow Rate: 2 l/min (0.5 gl/min)
- Power Supply: Hydraulic 12,5 ccm 2 pcs
Key Information
- Easy to change brushes
- Extended service life
- Independent motor on each brush
Product Information
The RotoCleaner is Mustad Autoline´s latest generation hooks and line cleaners. Based on proven technology this is the best solution to meet your hook cleaning requirements. The RotoCleaner cleans the hooks perfectly, even when using bait fish with heavy leathery skin.
Optimal cleaning of hooks and line increases the productivity and improves:
- The functionality of the hook separator
- The number of stops during hauling
- The life span of the fishing line
- The life span of the brushes
- Annual maintenance cost
Rotating brushes and water jets
The hooks and line pass through an integrated “fish-releaser” and are cleaned by four rotating brushes combined with water jets. Hydraulic motors synchronise both main hauler and hook separator to stopping and starting accordingly. The hook and line cleaner is opened and closed by a hydraulic piston. Hydraulic power is supplied by the same power source serving the hook separator and line retriever.
The RotoCleaner operates smoothly to as low as 20 rpm on the brushes. This prevents unnecessary wear on both the line and the brushes.
Fits most haulers
The RotoCleaner is produced from solid stainless steel, driven by durable hydraulic motors and an industry standard PLC system. The Mustad Autoline RotoCleaner can easily be fitted to most haulers, be low or high pressure.
New design
Single lid opening mechanism:
- Easy access to the brushes thanks to new lid mechanism
Decreased rotation speed on the brushes:
- The rotational speed of the brushes is lowered. The cleaner will operate smoothly to as low as 20 rpm on the brushes. This prevents unnecessary wear on the brushes and provides for increased brush life.
Sheltered hydraulic motors:
- The new drive mechanism allows the hydraulic motors to be located away from the flow of water; increasing the life span of the motor whilst reducing operating costs.
New design makes cleaning and replacing worn brushes easier.
MA HC 100 RotoCleaner
Deep Sea Hydraulic Systems
Key Features
- Weight: 160 kg
- Oil Flow Rate: 2 l/min (0.5 gl/min)
- Power Supply: Hydraulic 12,5 ccm 2 pcs
Key Information
- Easy to change brushes
- Extended service life
- Independent motor on each brush
Product Information
Optimal cleaning of hooks and line increases the productivity and improves
- The functionality of the hook separator
- The number of stops during hauling
- The life span of the fishing line
- The life span of the brushes
- Annual maintenance cost
The standard hook cleaner is equipped with a number of practical details:
- Stepless adjustment of brush spacing
- 3 sets of brushes
- Can be turned in four directions
- Easy to replace when worn out
- The jet washing unit is easy to connect or disconnect
- Opening and closing mechanism with automatic locking in open position
Fits most haulers
The hook cleaners are produced from solid stainless steel, driven by durable hydraulic motors and an industry standard PLC system. They can easily be fitted to most haulers, be low or high pressure.