MA BM 6000 E-LINE SuperBaiter
DeepSea Systems
Key Features
- Weight: 380 kg / 838 lbs
- Power Supply: Servo Electric
- Setting Speed: Up to 6 hooks/sec.
Key Information
- Baits up to 6 hooks per second
- High baiting precision
- Low maintenance cost
- Simple adjustment to desired bait size
- Easy troubleshooting
- Compatible for circle, EZ baiter and offset hooks
- Patented RotoBait™ system
Product Information
The MA BM 6000 SuperBaiter is designed as a part of the Mustad Autoline DeepSea System. Performance without compromise, – each detail is designed to make the baiting process even more accurate at high speed, – and still simple to operate.
Precision baiting
At up to six hooks per second the MA BM 6000 SuperBaiter automatically cuts the bait at a pre-set size and baits the hooks consistently at a speed of up to 360 hooks per minute.
When the first buoys and anchors are launched, the hooks and line are pulled from the storage magazines through the baiting machine and over the stern. Setting speed can vary between 6 to 10 knots (3-6 hooks per second depending on the spacing between the hooks).The bait is placed on a spiked conveyor chain that feeds it into the machine where the hooks trigger a knife to cut the bait. With the patented RotoBaiter function the bait is double crouched and secures accurate baiting of hooks passing through the SuperBaiter. The SuperBaiter is operated by one crewmember who feeds the bait onto the conveyor chain.
- Setting speed, 6 – 10 knots in high seas
- Compatible for Circle, EZ baiter and Offset hooks
- Error search via satellite
- Upgrade with LineSetter
Service controller Sinamics System
- Touch panel with easy operation, error codes shows in the display
- “Heavy Duty” function on the touch panel for additional knife force increase in periods
- Possibility to pre-program baiting of every seccond hook and up to every tenth hook if desired
The baiting machine can be supplied with Mustad LineSetter and LineController
Upgrade of old SuperBaiter is possible. Please contact us for further informatin.
MA BM 3000 Hydraulic AutoBaiter
DeepSea Systems
Key Features
- Cuts bait to a pre-set, consistent size
- Automatically double crouches bait onto the hook
- Capable of baiting 3 hooks per second
- Compatible with manual and hydraulic MagPacker, Cross Ship Rails, and HandyMag storage system
- Compact design, requiring minimal space for installation and operation
Product details
- Weight: 140kg (311lbs)
- Length: 1370mm
- Width: 770 + 530 mm
- Height: Adjustable 1600 - 1800mm
- Oil Flow Rate: 16/28 l/min
- Power Supply: Hydraulic
Product Information
The Mustad Autoline autobaiters automatically cuts the bait at a preset size and baits the hooks with precision.
Precision Baiting
The MA BM 3000 AutoBaiter baits hooks with precision at a speed of up to 180-200 hooks per minute (three hooks per second), cutting bait to a pre-set size.
Baitfish is placed on a spiked conveyor chain that feeds it into the machine. As the hook is pulled through, the knife is triggered, cutting the bait to a pre-set size (26mm-32mm). The hook then penetrates the bait twice before being shot over the stern.
Compact and flexible
The MA BM 3000 AutoBaiter is designed as a part of Mustad Autoline Coastal System and works perfectly with both the manual MagPacker and HandyMag storage magazines. It requires little space thanks to its compact design, and includes an integrated waste collector. The machine can operate with EZ/J-hooks ranging from size 11/0 to 15/0, and circle hooks from size 12/0 to 14/0 both straight and offset.
Shooting the line
When initial buoys and anchors are deployed overboard, lines are naturally pulled from the storage magazines through the baiting machine before being set. The baiting speed is approximately three to four hooks per second, depending on the spacing between the hooks and the speed of the boat. The baiting machine is operated by one crewmember who feeds bait fish onto the spiked conveyor belt.
MA HS 2020 E-LINE HookSeparator
DeepSea Systems
Key Features
- Weight: 250 kg / 551 lbs
- Height: Adjustable 1950 mm - 2250 mm
- Hauling Power: Adjustable
- Hauling Speed: 0 - 100 m/min
- Sheave Diameter: Outer diam 440 mm
- Power Supply: Electric synchronous servo motor
Key Information
- Baits up to 6 hooks per second
- High baiting precision
- Low maintenance cost
- Simple adjustment to desired bait size
- Easy troubleshooting
- Compatible for circle, EZ baiter and offset hooks
- Patented RotoBait™ system
Product Information
All-electric HookSeparator
High speed re-racking of hooks and line
The main function of the HookSeparator SP2020 is to separate the hoooks from the mainline and guide them onto the storage magazines. This is done automatically as the line is hauled onboard. The HookSeparator is also a slack taker keeping tension on the line coming from the main hauler.
Magnet pattern
The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline on to the magazine.
High quality components
The HookSeparator is made of stainless steel. The sheaves are made out of durable and lightweight aluminum composite material. The pressure wheel is spring loaded, making sure the sheaves get maximum grip on the line. A special hook guide design reduces wear on hooks and gear and ensures efficient re-racking result.
Optional water jet
To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water pump. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.
MA HS 2000-03 Hydraulic HookSeparator
DeepSea Systems
Key Features
- Weight: 300 kg / 660 lbs
- Height: 1910 mm
- Hauling Power: Adjustable
- Hauling Speed: 0-100 m / min
- Sheave Diameter: Outer diam. 440mm
- Oil Flow Rate: 16 l/min / 4,2 gl/min
- Power Supply: Hydraulic
New version - increased capacity
Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allowes the hooks to slide smoother and farther in the direction of the storage magazine which has been prooven to be less labor intensive.
Product Information
The latest version of HookSeparators
- Efficient separation of hooks and line
- Increased number of hooks hauled
- Less labour intensive operations
- Increased profit
High speed re-racking of hooks and line
The main function of the HookSeparator SP2000 is to separate the hoooks from the mainline and guide them onto the storage magazines. This is done automatically as the line is hauled onboard. The HookSeparator is also a slack taker keeping tension on the line coming from the main hauler.
New version – increased capacity
Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allows the hooks to slide smoother and farther in the direction of the storage magazine which has proven to be less labor intensive.
Magnet pattern
The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline on to the magazine.
High quality components
The HookSeparator is made of stainless steel. The sheaves are made out of durable and lightweight aluminum composite material. The pressure wheel is spring loaded, making sure the sheaves get maximum grip on the line. A special hook guide design reduces wear on hooks and gear and ensures efficient re-racking result.
Optional water jet
To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water pump. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.
MA HS 2000-02 Hydraulic HookSeparator
DeepSea Systems
Key Features
- Weight: 300 kg / 660 lbs
- Height: 1760 mm
- Hauling Power: Adjustable
- Hauling Speed: 0-100 m / min
- Sheave Diameter: Outer diam. 440mm
- Oil Flow Rate: 16 l/min / 4,2 gl/min
- Power Supply: Hydraulic
New version - increased capacity
Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allowes the hooks to slide smoother and farther in the direction of the storage magazine which has been prooven to be less labor intensive.
Product Information
Efficient re-racking of hooks and line
The main function of the Mustad Autoline HookSeparator is to separate the hooks from the mainline and guide them onto the storage magazines. This is done automatically and consistently as the gear is hauled onboard. The hook separator is also a slack taker keeping tension on the line coming from the main hauler.
Specially designed magnet pattern
The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline onto the magazine.
Optional water jet
To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water jet. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.
MA MPE E-LINE MagPacker
DeepSea Systems
Key Features
- Length: Magazines 3 - 3,5 - 4 m
- Hauling Power: Electric
Key Information
- Baits up to 6 hooks per second
- High baiting precision
- Low maintenance cost
- Simple adjustment to desired bait size
- Easy troubleshooting
- Compatible for circle, EZ baiter and offset hooks
- Patented RotoBait™ system
Product Information
The new generation MagPacker is an electric driven system for automatic handling and storage of hooks and line. Designed for better operational capabilities and a climate-neutral future.
This unit is developed as a part of the Mustad Autoline E-Line System and works optimally in combination with the E-Line SuperBaiter (MA BM 6000), E-Line Hauling unit (MA HH 4000), and E-Line HookSeparator (MA HS 2020). The E-Line components are connected and synchronized through a PLC-based control center to ensure continuous and optimal operations.
Discover the benefits
- Space efficient storage of magazines with hooks and line
- less tangling during setting, – the line coils don’t catch on other coils and turn around when moving the line towards the baiting machine
- Less manual handling of the gear during setting and hauling
- Increased safety on board
- Made of heavy-duty stainless steel
- One step further to a climate-neutral future
Number of hooks per meter
Please note that the quantity of hooks stated in quotes is an estimate. Quantity per meter will always depend on thickness, age and quality of the hooks and line. Consequently these given numbers are to be taken as a guideline only and not as factual numbers.
MA MPH Hydraulic MagPacker
DeepSea Systems
Key Features
- Space efficient
- Increased safety
- Time saving, - less tangling during setting
- Durable solution - made of heavy-duty stainless steel
- Power Supply: Hydraulic
Key Information
- Baits up to 6 hooks per second
- High baiting precision
- Low maintenance cost
- Simple adjustment to desired bait size
- Easy troubleshooting
- Compatible for circle, EZ baiter and offset hooks
- Patented RotoBait™ system
Product Information
The hydraulic operated MagPacker system for automatic handling and storage of hooks and line is designed to reduce manual labour and increase safety and efficiency onboard.
To ensure compact storage of lines a LinePress system is standard equipment on a MA MPH MagPacker storage system.
Key features
- Space efficient storage of magazines with hooks and line
- less tangling during setting, – the line coils don’t catch on other coils and turn around when moving the line towards the baiting machine
- Less manual handling of the gear during setting and hauling
- Increased safety on board
- Made of heavy-duty stainless steel
- Increased profit
Number of hooks per meter
Please note that quantity of hooks stated in quotes is an estimate. Quantity per meter will always depend on thickness, age and quality of the hooks and line. Consequently these given numbers are to be taken as a guideline only and not as factual numbers.
Weight example (approx.) without valves
1950 kg / 4300 lbs – incl. 20 empty magazines/ 3 m
2050 kg / 4519 lbs – incl. 20 empty magazines/ 3,5 m
2150 kg / 4740 lbs – incl. 20 empty magazines/ 4 m
Lenght of magazines 3 – 3,5 – 4 m
MA LP V2 – LinePress
The hydraulic MagPacker system is delivered with a line press as standard equipment. The line press keeps the rest of the line in place when setting and hauling to give room for the hooks and line sliding on the front magazine. Also, the line press act as a safety feature to prevent great movements of the heavy line during bad weather.
MA CR CrossShip rails with magazine trolleys
Product Information
Compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel.
Robust cross ship rails with magazine trolleys designed for manual handling and storage of magazines with hooks and line. the magazines are mounted to trolleys in transverse tracks and are pushed manualy to setting or hauling position.
Delivered with 110 < = 7mm ,125 < = 9 mm ,160 < = 11mm distance between the magazines.
MA HH 4000 E-LINE Hauling station
Product Information
Key Information
- Autonomous reaction on the vessel’s movements
- Responsive and accurate tension control
- Less risk of breakage and wear and tear of the line
- Increased productivity
- Easy to operate, low maintenance
- Time and space saving installation
An autoline vessel spends about 80% of the time on hauling the line. Efficient hauling is key to increased profit.
Our premium all-electric hauling station is equiped with a PLC based adaptive control system. Intelligent interaction provides responsive and accurate tension control. The instantaneous reaction to the vessel’s movements allows even smoother hauling of the line and may reduce loss of large fish during the hauling process and lowers the risk of breakage and wear and tear of the line.
The large diameter of the sheaves provides good grip of the line and is yet another measure to reduce wear and tear of both sheaves and lines.
MA HH 3200 Hydraulic SuperHauler
DeepSea Systems
Key Features
- Weight: 1099 kg / 2423 lbs
- Length: 1883 mm (with HookCleaner)
- Width: 1434/1233 mm (+/- LineRetriver)
- Height: 2327 - 1827 mm (adjustable long/short)
- Hauling Power: 1700 kg / 3750 lbs
- Hauling Speed: 150 m/min / 500 ft/min
- Sheave Diameter: 600 mm
- Oil Flow Rate: 100 l/min / 26,4 gal/min
- Power Supply: Hydraulic
Product Information
A compact and silent high-pressure hydraulic line hauler, horizontally mounted for better visibility and optimal pull force
- Heavy-duty stainless steel
- 3,2-ton pull on the capstan (7000lbs)
- Hydraulic Motor: Radial Piston stainless steel axle
- Easy to operate, low maintenance
- Standardised for 7 – 12mm line. Other diameters are optional.
Since approximately 80% of the time is used for hauling on board an Autoline vessel, efficient equipment is key to increased profits.
Large sheaves reduce wear and tear on the line while also significantly improving grip of the line. The hauler is directly powered by a radial piston motor with a stainless steel shaft.
The recommended solution is a complete hauling station with SuperHauler™ MA HH 3200, MA RC RotoCleaner,
The hauling unit can also be supplied as a stand-alone unit, and controlled manually by a valve at the rail.