MA BM 6000 SuperBaiter

E-LINE System

Key Features

  • Weight: 380 kg / 838 lbs
  • Power Supply: Servo Electric
  • Setting Speed: Up to 6 hooks/sec.

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


The MA BM 6000 SuperBaiter is designed as a part of the Mustad Autoline DeepSea System. Performance without compromise, – each detail is designed to make the baiting process even more accurate at high speed, – and still simple to operate.

Precision baiting

At up to six hooks per second the MA BM 6000 SuperBaiter automatically cuts the bait at a pre-set size and baits the hooks consistently at a speed of up to 360 hooks per minute.
When the first buoys and anchors are launched, the hooks and line are pulled from the storage magazines through the baiting machine and over the stern. Setting speed can vary between 6 to 10 knots (3-6 hooks per second depending on the spacing between the hooks).The bait is placed on a spiked conveyor chain that feeds it into the machine where the hooks trigger a knife to cut the bait. With the patented RotoBaiter function the bait is double crouched and secures accurate baiting of hooks passing through the SuperBaiter. The SuperBaiter is operated by one crewmember who feeds the bait onto the conveyor chain.

  • Setting speed, 6 – 10 knots in high seas
  • Compatible for Circle, EZ baiter and Offset hooks
  • Error search via satellite
  • Upgrade with LineSetter

Service controller Sinamics System

  • Touch panel with easy operation, error codes shows in the display
  • “Heavy Duty” function on the touch panel for additional knife force increase in periods
  • Possibility to pre-program baiting of every seccond hook and up to every tenth hook if desired

The baiting machine can be supplied with Mustad LineSetter and LineController

Upgrade of old SuperBaiter is possible. Please contact us for further informatin.


MA HS 2020 E-LINE HookSeparator

E-LINE System

Key Features

  • Weight: 250 kg / 551 lbs
  • Height: Adjustable 1950 mm - 2250 mm
  • Hauling Power: Adjustable
  • Hauling Speed: 0 - 100 m/min
  • Sheave Diameter: Outer diam 440 mm
  • Power Supply: Electric synchronous servo motor

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


All-electric HookSeparator

High speed re-racking of hooks and line

The main function of the HookSeparator SP2020 is to separate the hoooks from the mainline and guide them onto the storage magazines. This is done automatically as the line is hauled onboard. The HookSeparator is also a slack taker keeping tension on the line coming from the main hauler.

Magnet pattern

The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline on to the magazine.

High quality components

The HookSeparator is made of stainless steel. The sheaves are made out of durable and lightweight aluminum composite material. The pressure wheel is spring loaded, making sure the sheaves get maximum grip on the line. A special hook guide design reduces wear on hooks and gear and ensures efficient re-racking result.

Optional water jet

To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water pump. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.


MA MPE E-LINE MagPacker

E-LINE System

Key Features

  • Length: Magazines 3 - 3,5 - 4 m
  • Hauling Power: Electric

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


The new generation MagPacker is an electric driven system for automatic handling and storage of hooks and line. Designed for better operational capabilities and a climate-neutral future.

This unit is developed as a part of the Mustad Autoline E-Line System and works optimally in combination with the E-Line SuperBaiter (MA BM 6000), E-Line Hauling unit (MA HH 4000), and E-Line HookSeparator (MA HS 2020). The E-Line components are connected and synchronized through a PLC-based control center to ensure continuous and optimal operations.

Discover the benefits

  • Space efficient storage of magazines with hooks and line
  • less tangling during setting, – the line coils don’t catch on other coils and turn around when moving the line towards the baiting machine
  • Less manual handling of the gear during setting and hauling
  • Increased safety on board
  • Made of heavy-duty stainless steel
  • One step further to a climate-neutral future

Number of hooks per meter

Please note that the quantity of hooks stated in quotes is an estimate. Quantity per meter will always depend on thickness, age and quality of the hooks and line. Consequently these given numbers are to be taken as a guideline only and not as factual numbers.


MA HH 4000 E-LINE hauler

E-LINE System

Key Features

  • Weight: 1110 kg / 2447 lbs
  • Length: 2020 mm (with HookCleaner)
  • Width: 1306 mm
  • Height: 1500 - 1800 mm
  • Hauling Power: 2000 kg / 4400 lbs
  • Hauling Speed: 150 m/min / 500 fpm/min
  • Sheave Diameter: 700 mm
  • Power Supply: El. servo motors 32 amp/ 36 KW

Product Information


Key Information

  • Autonomous reaction on the vessel’s movements
  • Responsive and accurate tension control
  • Less risk of breakage and wear and tear of the line
  • Increased productivity
  • Easy to operate, low maintenance
  • Time and space saving installation

An autoline vessel spends about 80% of the time on hauling the line. Efficient hauling is key to increased profit.

Our premium all-electric hauling station is equiped with a PLC based adaptive control system. Intelligent interaction provides responsive and accurate tension control. The instantaneous reaction to the vessel’s movements allows even smoother hauling of the line and may reduce loss of large fish during the hauling process and lowers the risk of breakage and wear and tear of the line.

The large diameter of the sheaves provides good grip of the line and is yet another measure to reduce wear and tear of both sheaves and lines.


MA HC 400 E-LINE RotoCleaner

E-LINE System

Key Features

Key Information

  • Easy to change brushes
  • Extended service life
  • Independent motor on each brush

Product Information


New design and better operational capabilities

Our latest design features significant improvements for operational efficiency and maintenance.

  • Easy Brush Replacement: The new design allows for effortless brush changes, even during operation, streamlining maintenance procedures and minimizing downtime.
  • Extended Service Life: Each brush is longer and moves vertically, maximizing brush utilization and significantly extending its service life. This innovative approach reduces the frequency of replacements, saving time and resources.
  • Independent Motor for Each Brush: Every brush is equipped with its own independent electric motor, featuring external bearings for added reliability and consistent performance. This design ensures optimal brush movement and operational stability, enhancing overall system efficiency.

With these enhancements, our system not only delivers superior performance but also offers simplified maintenance and prolonged durability, setting new standards in brush-based equipment technology.


Mustad EZ baiter and Circle hooks

E-LINE System

Key Features

  • Weight: 380 kg / 838 lbs
  • Power Supply: Servo Electric
  • Setting Speed: Up to 6 hooks/sec.

Key Information

Mustad hooks are still made by hook wire produced at the factory in Gjøvik, Norway.

Product Information


Purpose made hooks developed for Mustad Autoline Systems

Mustad EZ baiter and Circle hooks are strictly made to Mustad Autolines specifications for optimal performance with our systems. All hooks are perfectly shaped and made of strong high carbon steel in order to succeed where others fail. Precision baiting, sharpness, strength, flexibility and corrosion resistance are key factors in making the best suited hooks for Autolining.

Mustad Autoline distributes hooks for commercial fishing produced by O. Mustad & Son AS.

Mustad 40 000 DT

The Mustad 40 000 DT hook is a semi-circle semi EZ hook where the size 12/0 is as strong as a regular 15/0 circle hook. The hooks are forged and the smaller diameter means more hooks per magazine. Due to a unique tempering process this hook is very stong and keeps the shape. The hook breakes rather than bends if stretched. The 40 000 hook is the preferred hook by most of our customers fishing for cod, tusk and ling among others.

Mustad 40 000 DT is produced by O.Mustad & Son AS

Mustad 40 001 DT

New 14/0 semi Circle and semi J-hook with 15/0 wire. This is a larger version of the 40 000 hook (not forged) designed for optimal catch of toothfish, halibut and black cod among others. The properties of this hook is a good combination of extra strength while also bending slightly when stretched.

Mustad 40 001 DT is produced by O.Mustad & Son AS


Mustad MA Snooded hooks

E-LINE System

Key Features

  • Weight: 380 kg / 838 lbs
  • Power Supply: Servo Electric
  • Setting Speed: Up to 6 hooks/sec.

Key Information

  • High quality through research and experience
  • Sewed loops for strenght and smooth passage through the Mustad Autoline™ system
  • Exact same lenght on each snood
  • Both polyester and Nylon snoods available in white or blue

Product Information


Mustad Autoline has in close cooperation with our suppliers, designed a range of snooded hooks for optimal performance with our Mustad Autoline™ Systems.

  • High quality through research and experience
  • Sewed loops for strength and for smooth passage through the Mustad Autoline™ system
  • Consistent length on all snoods
  • Both polyester and Nylon snoods

Braided nylon gangions

The high quality braided nylon with industrial sewing of the loop has stood to the test to be a strong and durable product preferred by more and more Autoliners.

Twisted polyester gangions

The twisted gangions are made of polyester yarns and can be made with plain ends, sewed loops or knotted ends. The ready snoods are impregnated.

Industrial sewing

Our special industrial sewing of loops give a consistent length on all snoods, it is proven to be stronger than a regular knot. The gangions also pass smoother through your Mustad Autoline™ system.

Hooks and gangions are also available as separate items.