MA BM 3000 AutoBaiter

Coastal Systems

Key Features

  • Weight: 140kg (311lbs)
  • Length: 1370mm
  • Width: 770 + 530 mm
  • Height: Adjustable 1600 - 1800mm
  • Oil Flow Rate: 16/28 l/min
  • Power Supply: Hydraulic

Key Information

  • Cuts the bait at a pre-set size
  • Automatically double crouches the bait on the hook
  • 3-4 hooks per second

Product Information


The AutoBaiter designed as a part of the Mustad Autoline Coastal System is based on the well proven Mustad principles. The AutoBaiter has a compact design, requires little space and is equipped with the reliable and patented RotoBaiter baiting system.

Precision baiting

At three to four hooks per second the MA BM 3000 AutoBaiter cuts the bait at a pre-set size and baits the hooks consistently at a speed of up to 180 – 200 hooks per minute (3 – 4 hooks per second).

The bait is placed on a spiked conveyor belt that feeds it into the machine where the hooks trigger a knife to cut the bait at a pre-set size. Equipped with the patented RotoBaiter baiting system the bait is penetrated twice onto the hook before it’s deployed over the stern.

Compact and flexible

The MA BM 3000 AutoBaiter is designed as a part of Mustad Autoline Coastal System and works perfectly with both the manual MagPacker and HandyMag storage magazines. It requires little space thanks to its compact design, and includes an integrated waste collector. The machine can operate with EZ/J-hooks ranging from size 11/0 to 15/0, and circle hooks from size 12/0 to 14/0 both straight and offset.

Shooting the line

When initial buoys and anchors are deployed overboard, lines are naturally pulled from the storage magazines through the baiting machine before being set. The baiting speed is approximately three to four hooks per second, depending on the spacing between the hooks and the speed of the boat. The baiting machine is operated by one crewmember who feeds bait fish onto the spiked conveyor belt.

 

A typical deck arrangement on a coastal vessel:


MA HS 2000-02 HookSeparator

Coastal Systems

Key Features

  • Weight: 300 kg / 660 lbs
  • Height: 1760 mm
  • Hauling Power: Adjustable
  • Hauling Speed: 0-100 m / min
  • Sheave Diameter: Outer diam. 440mm
  • Oil Flow Rate: 16 l/min / 4,2 gl/min
  • Power Supply: Hydraulic

New version - increased capacity

Compared to the version SP2000-02 the SP2000-03 version is raised by 150mm to enable the exit rail to slope. This modification allowes the hooks to slide smoother and farther in the direction of the storage magazine which has been prooven to be less labor intensive.

Product Information


Efficient re-racking of hooks and line

The main function of the Mustad Autoline HookSeparator is to separate the hooks from the mainline and guide them onto the storage magazines. This is done automatically and consistently as the gear is hauled onboard. The hook separator is also a slack taker keeping tension on the line coming from the main hauler.

Specially designed magnet pattern

The main reason for its efficiency is eight patented, compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline onto the magazine.

Optional water jet

To clean the hooks and line before storage, the HookSeparator can also be delivered with a high-pressure water jet. The vibration on the swivels caused by the water jet will also ease the un-twisting of snoods from the mainline, and assure maximum hook catch rate.


MA HS 500 HookSeparator

Coastal Systems

Key Features

  • Weight: 120 kg / 265 lbs
  • Height: 1670 mm
  • Hauling Power: Adjustable
  • Hauling Speed: Recommended working speed up to 60m/min
  • Sheave Diameter: 315 mm
  • Oil Flow Rate: 16 l/min
  • Power Supply: Hydraulic
  • Line diameter: 5,5mm - 9mm

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


Automatic re-racking of hooks and line for vessels from approx. 30 feet

  • Designed to work with Mustad Autoline Coastal System
  • Works perfectly with both MA MPM MagPacker and HandyMag storage magazines
  • Adaptable to the vessels existing hydraulic system
  • Works with hooks 11/0 – 12/0 EZ #39975 and 12/0 #40 000

Main function

The main function of the hook separator is to separate the hooks from the mainline and guide them onto the storage magazines.This is done automatically as the line is hauled on board. The hook separator is also a slack taker keeping tension on the line coming from the main hauler.

The HookSeparator™ MA HS 500 works perfectly with Autoline Coastal™ System and both MA MPM MagPacker  and MA MAGH HandyMag Storage systems for hooks and line.

Light weight

The total weight of the HookSeparator™ MA HS 500 is 120 kg; less than half the weight of the hook separator SP2000. This reduction in weight makes the new hook separator an excellent solution for vessels with weight limitations.

Powerful magnets

The main reason for its efficiency is the compact and extremely powerful magnets. By catching the hooks, the magnets separate them from the mainline. The hooks are guided on to the storage magazines, and the mainline coils hang below.

Spring loaded pressure wheel for maximum grip on the line

The pressure wheel is spring loaded, making sure the sheaves get maximum grip on the line. The slide rail is specially designed for the various hooks to ensure an efficient re-racking result.

High quality components

The hook separator is made of stainless steel.


MA CR CrossShip rails with magazine trolleys

Coastal Systems

Key Features

  • Weight: 140kg (311lbs)
  • Length: 1370mm
  • Width: 770 + 530 mm
  • Height: Adjustable 1600 - 1800mm
  • Oil Flow Rate: 16/28 l/min
  • Power Supply: Hydraulic

Key Information

  • Cuts the bait at a pre-set size
  • Automatically double crouches the bait on the hook
  • 3-4 hooks per second

Product Information


Compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel.

Robust cross ship rails with magazine trolleys designed for manual handling and storage of magazines with hooks and line. the magazines are mounted to trolleys in transverse tracks and are pushed manualy to setting or hauling position.

Delivered with 110 < = 7mm ,125 < = 9 mm ,160 < = 11mm distance between the magazines.


MA MPM Manual MagPacker

Coastal Systems

Key Features

  • Weight 220 kg / 489 lbs incl.10 empty mags of 3 m
  • Length Magazines 2 - 2,5 - 3 - 3,5 - 4 m

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


The manual MagPacker system is a compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel.

Designed specially with regards to safety and functionality on board. The MagPacker is a strong stainless steel rack keeping the heavy magazines loaded with hooks and line in place. Optional line press system.

Heavy magazines are moved in position for setting or hauling by manual operations. Empty magazines are pushed into a temporary storage position above the rack awaiting hauling operation.

Delivered with three different spacings between the magazines:
110 mm spacing < = 7 mm main line
125 mm spacing < = 9 mm main line
160 mm spacing < = 11 mm main line

The MagPacker is located between the AutoBaiter and the HookSeparator.

Safety and good working conditions

Small vessels tend to move a lot. It is essential to focus on safety and good working conditions on board. The MA MPM – manual MagPacker is developed with special emphasis on safety and function. One person operates the system and can easily position the storage magazines to setting or hauling positions.

The magazines

The Magazines are made of aluminium and stainless steel, with complete sliding rails, inspection slits and hatches for simple mounting of hooks and snoods. The adjustable Magazines can easily be adapted to different hook types and sizes by adjusting the top rail.

Number of hooks per meter magazine

Please note that quantity of hooks stated in quotes is an estimate. Quantity per meter will always depend on thickness, age and quality of the hooks and line. Consequently these given numbers are to be taken as a guideline only and not as factual numbers.


MA HM 150 HandyMag storage rack

Coastal Systems

Key Features

  • Weight: 85 kg /187 lbs (incl. 10 empty magazines/1m)
  • Magazine Length: 1 m

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


Compact and functional storage of magazines loaded with hooks and line, tailored to available space on board the vessel.

The Mustad Autoline HandyMag storage rack i s designed to fit on smaller vessels, from approx. 30 feet and above. The storage unit is flexible and is tailored according ot the space available on board. Standard lenght of magazine is 1m / 40 inch.

HandyMag storage magazines are cutomized to fit the following hook types:

  • Mustad EZ baiter (J-hooks) 11/0 – 14/0
  • Mustad #40 000 (semi EZ/semi circle/J-hook)
  • Mustad Circle hook 12/0 – 15/0

– Both offset and straight


MA HV 200 Hauling unit

Coastal Systems

Key Features

  • Weight: Approx. 430 kg
  • Hauling Power: 550 kg (720 kg max.)
  • Hauling Speed: 123 m/min
  • Sheave Diameter: 400 mm outer diam.
  • Oil Flow Rate: 54 l / min
  • Power Supply: Hydraulic
  • Line diameter: 3,5 - 11,5 mm

Key Information

More than 80% of the time onboard a longliner is used for hauling – efficient hauling is key to increased profits

Product Information


The hauler is developed as a part of a Mustad Autoline system, it can also be used as a stand-alone unit.

Complete with hook cleaner and rail roller

The hauling station is delivered complete with hook cleaner and rail roller. The rail roller, with Ø 219,1 / 9” and roller bearing, can be adjusted in an angle up to 120˚. The rail roller section is hinged, and may be tilted inwards when not in use.

  • Efficient guidance of hooks onto the back of the sheaves by a set of magnets.
  • Delivered with a OMTW-500 EMD motor with speed sensor as standard.

Optional hook cleaning system:

  • Hook cleaner with four rotating brushes
  • Hook cleaner with three pairs of fixed brushes

An example of a typical deck arrangement on a coastal system:


MA HV 100 Hauling unit

Coastal Systems

Key Features

  • Weight: 240 - 310 kg
  • Length: 2480-1980 mm (variation from 35˚ to 65˚)
  • Width: 1100-1580 mm (variation from 35˚ to 65˚)
  • Height: 701 mm (adjustable)
  • Hauling Power: 495 (normal) (660 kg max.)
  • Hauling Speed: 123 m/min
  • Sheave Diameter: 400 mm outer diam.
  • Oil Flow Rate: 43 l / min.
  • Power Supply: Hydraulic
  • Line diameter: 5,5 - 9,5 mm

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


Our new light hauler MA HV 100, is developed as part of the Mustad Autoline Coastal System, but can also be used as a separate hauling station.

  • Adjustable sheaves for line 5,5 – 9,5 mm
  • Hauling power 495 kg (normal) (660 kg max.)
  • Hauling speed up to 123 m/min
  • Delivered with a OMTW 400 EMD motor with speed sensor as standard.

The hauler has got a magnet and a recess behind the sheaves, useful for guiding the hooks to the back of the sheaves, – a safety benefit.

Hook Cleaner: Three solutions to clean the hooks and line:

  • 4 rotating brushes
  • 2 rotating brushes
  • 2×2 fixed brushes

Rail roller

The rail roller comprise three separate rolls: L400 x Ø60mm. It is hinged, and may be tilted inward when not in use. The roller system consists of several rollers instead of one giving an increased circumference for the line to pass over, thus reducing fiber breakage in the line. This feature will reduce loss of fish at the rail.

Installation / Customization

For easy installation on deck space available the hauling unit can be angled up to 30˚

Health and safety

  • Caution by rail roller, hook cleaner, line hauler, funnels and pulleys is required due to unprotected hooks.
  • Keep hands and fingers away from moving parts


MA HV 50 Rail mounted hauler

Coastal Systems

Key Features

  • Weight: 200 kg
  • Hauling Speed: up to 130 m / min at 43 l / min
  • Sheave Diameter: 400 mm outer diam.
  • Oil Flow Rate: 43 l / min
  • Power Supply: Hydraulic
  • Line diameter: up to 7,5 mm

Key Information

  • Baits up to 6 hooks per second
  • High baiting precision
  • Low maintenance cost
  • Simple adjustment to desired bait size
  • Easy troubleshooting
  • Compatible for circle, EZ baiter and offset hooks
  • Patented RotoBait™ system

Product Information


The hauler

  • The sheaves are adjustable for line up to 7,5 mm
  • Supplied with 400 cc engine
  • Hauling speed up to 130 m / min at 43 l / min
  • Delivered with either tub funnel for hand baiting or guide tube for Mustad Autoline System
  • Handles both monofilament and multifilament.

Rail Roller

The rail roller sports three individual rolls: L400 x Ø60mm. The roller system consists of several rollers instead of one giving an increased circumference to ease the line over, thus reducing fiber breakage. This feature may reduce loss of fish at the rail.

Hook Cleaner

Two solutions to clean the hooks and line:

  • 2 rotating brushes
  • 2 fixed brushes


MA PLC Control System

Coastal Systems

Key Features

  • Weight: 5-10 kg
  • Length: 140 mm
  • Width: 280 mm
  • Height: 380 mm
  • Power Supply: 24VDC

Key Information

  • Cuts the bait at a pre-set size
  • Automatically double crouches the bait on the hook
  • 3-4 hooks per second

Product Information


Get the most out of your equipment by taking control of the hauling and baiting process

Reduce the risk of line breaches and increase hauling efficiency. Essential information such as the hauling speed, hauling power, tension and baiting percentage are displayed and gives you an exact picture and control of the operations.

Live information – Intelligent interaction – Tighter lines when hauling – avoid line breaches – Increased productivity – More quality fish to market!

Flexible and stable system

The control center is based on PLC (Programmable Logic Controller) technology, and is a compact unit collecting and processing data received from pulse and speed sensors in the setting and hauling units.

Choose your equipment level:

Core

  • Features
  • The cabinet
  • HMI touch display
  • Hauling speed indicator
  • Pressure indicator
  • Hauling speed sensor
  • Hydraulic pressure sensor
  • Heating element with thermal swich

Plus

  • Core features, plus
  • Line tension adjustment and control with distribution valve
  • Hauling speed adjustment and control with distribution valve
  • Control panel with setpoint
  • Propotional hydraulic valve (electric)

Ultimate

  1. Plus features, plus
  2. Baiting percentage
  3. Baiting speed
  4. Fish counter
  5. Catch per hook
  6. Estimated hauling time

Different addons available in addition to the different packages:

  • Pressure control with existing distribution valve
  • Extra HMI monitor
  • Extra hauling speed and pressure indicators
  • Joystick or potmeter setpoint adjustment

Upgrade

You may at any time upgrade and get more valuable information from your controller system. Contact us for further information!

Compatible with other hauling systems?

The PLC Control system is tailor made for the Mustad Autoline Systems but may also be compatible with other hydraulic hauling systems. Contact us for further information.